Wednesday, January 20, 2010

Salvaged Bathroom Vanities

Yep. I know I told you one of our vanities was coming from Craigslist in the form of a dry sink. Well, much to our disappointment, the transaction didn’t work out. We visited the piece of furniture one snowy day and were surprised to find a shelf that was nearly invisible in the picture posted online. It would have impeded our plans to install a vessel sink and faucet.

Weeks went by and we searched for the perfect salvaged cabinet or table that could serve as our vanities. Initially, we thought it would be pretty easy to find something that would work. We were wrong. Either that, or we are picky! I'm happy to report that we finally found them. And we are in love with them. Especially this one.


What is it? Good question. The local salvage store labeled it: “Corn stalk chopper?” Seems they weren’t too sure either. But after some research, I’m pretty sure they tagged it right. And I’m pretty sure it’s going to be the coolest-looking bathroom vanity I’ve seen. We’re going to keep this on the first floor and install this vessel sink from Lowes...


...and this Delta faucet on top. (Both sink and faucet will be mounted towards the wider-ended side.)


For our second floor bathroom, we found this gem hiding in our basement. We’d apparently taken the castoff from someone who was moving to a new house and forgot all about it. I think it has 'rustic bathroom vanity' written all over it. Don’t you?


We’re going to place this Kraus vessel sink and this Delta faucet on top.




I’m not a “visual” person, so it’s been difficult for me to picture what everything will look like when all is said and done. But, for some reason, I can “see” these vanities! And I hope their old-fashioned charm will help to balance some of the more modern flooring and bath/shower choices we’ve made.

Friday, January 15, 2010

Progress Report: Energy Efficient Windows

I’ve mentioned this before, but I’ll state it again for any newcomers (or those of you who may have forgotten): Our home is being built based on a passive solar design. Because of this, windows are an important element to reduce our heating, cooling and lighting needs. In order to maximize solar heat gain in the winter, our major glazing area faces south to take advantage of the sun in the winter when it’s low in the sky. The roof overhang was designed specifically to avoid excessive heat gain in the summer when the sun is high. You’ll notice both of these features in the photo below. (Note the windows just below the roof line that are barely visible.)


Window size and frequency is just as important on the east-, west- and north-facing walls. The photo below shows our north-facing wall. The windows on this wall are smaller and fewer than those on the south wall, on purpose. As our house sits, much of the winter winds come from this direction. Also, north-facing windows take in little solar heat. Therefore, they will mainly be used to provide ample daylight in back rooms of the house.


Our windows have a low-emissivity coating on them, which means they are a bit more expensive than regular windows, but according to the U.S. Department of Energy, they reduce energy loss by as much as 30-50%. They also meet or exceed Energy Star guidelines.

Originally, we were going to install Marvin windows in our house. But when we compared the Marvin/Pella windows side-by-side, we realized we could get the same quality windows for a heck of a lot cheaper.

I was also pleased to see a whole section on Pella’s Web site dedicated to their “green commitment.” Here’s what they say they are doing to help the environment:
  • Recycling — Pella’s process minimizes our use of nonrenewable resources.

  • Responsible Procurement — Pella uses sustainable sources and works with vendors who practice responsible harvest and replenishment.

  • Pollution Minimization — In 2006, the EPA recognized Pella with its Pollution Prevention for Environmental Excellence Program honorable mention award for our responsible manufacturing processes.

  • Reducing Energy Consumption — Pella offers the windows and doors rated #1 for energy efficiency among top national brands.
The company also claims to be FSC certified, offering the option of windows and doors made from wood certified to have been harvested from well-managed forests.

Friday, January 8, 2010

Energy Efficient—and Affordable—Appliances

We needed to get all of our appliance specs into Presby this past week so they could plan/build accordingly. Sure, this task seems pretty undemanding at face value. But in reality, we spent weeks contemplating cook tops and dwelling on dryers. And at times the process wasn’t fun—like when we (well, not me) stood in line on Black Friday at 4:00 a.m. for a washer/dryer…

Yep, choosing appliances took weeks of researching the most efficient models, head scratching over where certain appliances would fit and unearthing the best deals to make sure we stayed within our budget.

One common theme you will notice is that all our appliances are electric. We hope to offset a majority, if not all, of our electric use from our own sustainable energy sources (currently solar & hopefully wind in the future).

Without further ado, here is what we purchased:

Cook Top & Wall Oven- Remember the drama that ensued when we realized we’d need a fan to vent our stove? Because we didn’t want to obstruct the view, and due to the lack of downdraft options in slide in ranges, we opted for a separate cook top and wall oven. Our research revealed that convection ovens are more energy efficient than conventional ovens because they house a fan that blows air around inside the unit—meaning shorter cooking times at lower temperatures. We chose a Kenmore Elite 30 in. Convection Wall Oven and GE Profile 30" Downdraft Electric Cooktop. Both were purchased from the Sears outlet. (Photos courtesy Sears & GE)





Washer/Dryer- Because our laundry room is also serving as our pantry, we need as much space as possible to function in the small space. So, we opted for a stackable washer and dryer. My other half stood in line at an insane hour of the morning on Black Friday to buy this washer/dryer combo for MUCH less than it’s worth. (Thank you!) The washer is Energy Star-compliant; however, dryers are not rated under the Energy Star program. The dryer will only see action in the colder months anyway :) (Photos courtesy Sears)




Refrigerator- Because refrigerators are charged with being the biggest energy consumers, we spent a lot of time researching this appliance, and chose the Frigidaire 18.2 Cu. Ft. Top Mount Refrigerator for various reasons:
  • It uses 34% LESS energy than what is needed to meet the minimum federal government standard (NAECA);

  • It’s estimated yearly operating cost is just $41;

  • It has a top-mounted freezer, which uses 10–25% less energy than bottom-mount or side-by-side models;

  • It lacks an icemaker and water dispenser on purpose. According to the Department of Energy, while these features are convenient, they will increase energy use;

  • It comes in around $500-600. (Photo courtesy Lowes)

Dishwasher- We chose the Frigidaire Gallery Stainless Steel 24 in. Built-In Dishwasher because it was Energy Star compliant, good looking and on sale! (Photo courtesy Sears)

In every appliance we researched and purchased energy consumption was our primary concern. The less kWh we have to use the easier it will be to make our home a zero energy home!

Sunday, January 3, 2010

Progress Report: Roofed In and Framed!

The white stuff was falling in the White Mountains last week when we checked in on the progress of the house and rang in the New Year in New Hampshire.

The last time we visited our home, the house was nothing more than a hole in the ground. It was surreal (and super exciting) to see walls, a roof, framed interior rooms and partial decking this time around.

As promised, here are a few pictures we took during our walk through.

Below is a view of the house from the road:

And here is our master bedroom:

Our second floor loft hallway:

Looking up at our south-facing deck:

Pex tubing in the basement floor will deliver radiant heat:

We also talked lighting during our visit. We walked through the house with the electrician to determine the location of the lights and switches. And after doing some research, we’re thinking of incorporating LED recessed lighting in the kitchen and living area, specifically the Cree LR6 bulb.


This LED light is more efficient than conventional lighting, Energy Star-certified and a greener solution to compact fluorescent bulbs as it contains no mercury. It is, of course, much, much, much more expensive than traditional bulbs, though...

Hmmm, decisions, decisions.

Sunday, December 27, 2009

Meeting in the Mountains

As I write this, my other half is on a multi-day backpacking trip. He and five of our friends camped out on our land before the start of their adventure. A quick phone conversation revealed that the roof is enclosed and the rooms in the house are framed! There’s even a ladder leading up to the loft—at which point I tried (unsuccessfully) to convince him to sleep in the “master bedroom.”

When I asked how everything looked, “small” was the answer I received. Yikes! I was reassured by others, however, that even the biggest houses look disproportionate at this stage of the game. Let’s hope so. There’s not even drywall up to close off the rooms yet!

Yours truly will be joining her other half later in the week. He’ll be coming off the mountain the day we meet with our builder, finalize some changes and (I think) walk through the house with an electrician.

I’m so thrilled with the way the house is coming along, despite the snow and now rain New England has received. Expect lots of progress pictures when I return.

Best wishes for you all in 2010!

Monday, December 21, 2009

Why We Chose a Small Footprint

Early on in our home building process we worked closely with an architect firm to design the perfect home. For us, that meant a home that was efficient and affordable. One of the easiest ways to achieve both of those things was to reduce the size of our home’s footprint. Our reasons for doing so were plentiful:
  • It would take less energy and effort to build;

  • There would be fewer building materials used;

  • More earth would be left undisturbed;

  • Once it’s complete, our home will use less energy to operate;

  • And less energy means more savings each month for us.

Plus, we strongly opposed building rooms into our home that would go unoccupied. So, there won’t be multiple rooms that serve the same function (i.e., family room and living room). By including only necessary square footage, we won’t have to heat, clean and pay taxes on rooms that are used minimally—or not at all—throughout the year.

We are also on a mission to lead a simplified life, where people and experiences trump possessions. And we hope a small home will force us to cut back on the desire to purchase material things that are just that—things—and help us to focus on what’s important. We try hard to make our (few) purchases serve a purpose, or allow us to experience life in a different and exciting way. We know not everyone subscribes to that theory. But we’ve found more happiness in gifting each other a weekend hiking in the wilderness, than giving each other the latest gizmo.

There will be no clutter in this home!! (Yeah, right…)

Thursday, December 17, 2009

Progress Report: The Ridge is Up

Our dedicated construction crew is working so hard to make our dream home a reality. And we are so thankful. The snow is now falling—and the temperature is dropping— in New England, but we’re close to having our house enclosed and roofed in. Things are getting exciting—take a look!


After framing, the walls will be constructed and insulated with spray foam to make the house as air tight and efficient as possible. For us, spray foam was a more cost-effective alternative to SIPS.

A close look at the photo will reveal our steep and low hanging south-facing roof that will house the photovoltaic panels and solar hot water collectors.